Ensave Energy Private Limited
Ensave Energy Private Limited
Ambawadi, Ahmedabad, Gujarat
GST No. 24AADCE7796D1ZI
TrustSEAL Verified
Call 0804875847689% Response Rate
SEND EMAIL

New Items

ESD5500E Speed Control Unit

ESD5500E Speed Control Unit
  • ESD5500E Speed Control Unit
Get Best Quote
Approx. Price: Rs 14,000 / UnitGet Latest Price
Product Brochure

Product Details:

Model No.ESD5500E
Ambient Operating Temperature Range-40 deg to +180 deg F (-40 deg to +85 deg C)
Relative Humidity95%
Speed Range1K-7.5K Hz
Supply12 or 24 VDC
Power Consumption50 mA
Speed Sensor Signal0.5-120 Volts RMS

Electronic Speed Governor for diesel & gas engines Electronic Speed Governor for diesel & gas engines

Description:

  • GAC is a leading supplier of Electronic governors for worldwide engines. GAC governors are suitable for Diesel & Gas engines in the power range of 5 hp to 1700 hp. Major Engine Manufactures in India viz. Kirloskar, Cummins, Greaves use GAC governors. GAC governors are well proven for harsh Indian atmospheric conditions. Madhura is Exclusive distributor for Governors America Corporation (GAC), USA for India.Ensave Corporation is Exclusive Distributor for Madhura International.Electronic Speed Governor for diesel & gas engines

Major Features

  • Great flexibility to match Dynamics of a wide range of engine applications.
  • Independent GAIN & STABILITY adjustments.
  • Closed PID Loop. EMC compliance.
  • Starting fuel limiting and speed ramping to limit Exhaust smoke during start-up.
  • Analogue & Digital option.
  • Versatile modes - Isochroous, Droop, Single, Parallel.
  • Over speed protection and Crank termination.
  • Very fast acting electronics to provide optimum performance (30 to 75 ms response time).
  • High performance, Rugged, Precise control
  • Option of Pump mounted actuators and external actuators available
  • Recognitions CE, UL, CSA, NFPA, Military & marine.

Applications:

  • Generating set - fixed speed & variable speed
  • Pumps, compressor
  • Marine propulsion
  • Locomotive
  • OFF Highway vehicles
Request
Callback
Yes! I am Interested

Inteli Drive DCU Engine Controller

Inteli Drive DCU Engine Controller
  • Inteli Drive DCU Engine Controller
Get Best Quote
Approx. Price: Rs 80,000 / UnitGet Latest Price
Product Brochure

Product Details:

Country of OriginMade in India
Power Supply Range8-36 V DC
Operating Temperature-20 deg C to +70 deg C
Storage Temperature-30 to +80 deg C
Humidity95 % non-condensing
Protection Front PanelIP 65
Dimensions183 x 123 x 47 mm
Weight800 gm
Heat Radiation9 W

Product Description:

  • Specialized engine controller for Industrial applications variable speed (AS) or single speed (SS)
  • Provide control, monitoring and protection diesel/gas engine and application side as well
  • Communication with up to 10 CAN J1939 (or similar like KWP2000) devices at same time.

Key Features:
  • Support of machinery with multiple CAN devices (ECU, ACM, SCR etc.)
  • Engine controller for land-based applications powered by engine driven compressors and pumps
  • Event driven History up to 4 000 records 
  • Speed control for Tier4Final/Stage V engines
  • Plug & Play support of InteliVision display family of ComAp IV5, IV8, IV12T
  • Configurable large PLC interpret with [[[Undefined variable TechnicalTerms.PLC Editor]]] and monitor
  • 14 binary inputs, 14 binary outputs, 8 analog inputs
  • Over 100 binary inputs and outputs are available via CAN modules
  • 3 level password protection
Request
Callback
Yes! I am Interested

InteliDrive Fire Pump Controller

InteliDrive Fire Pump Controller
  • InteliDrive Fire Pump Controller
Ask For Price
Product Price :Get Latest Price
Product Brochure
InteliDrive Fire Pump Controller modular engine controller is designed for diesel driven fire pumps applications based on the NFPA 20 standard. The controller utilises the hardware of a standard ComAp industrial engine controller, with a proven track record for flexible and reliable control gas or diesel applications. The ComAp engine controller has an LCD screen for system information and fault indication, control buttons for switching between automatic and manual operation. Manual operation allows the diesel engine to be started using local buttons on the fascia of the controller or by external buttons on the control panel. Automatic mode of operation provides starting by a remote digital input switch or system pressure switch. The control system incorporates two battery starter systems; the controller monitors the voltage on both battery systems, automatically switching between battery sets on a cyclic basis or low battery voltage condition. The controller has configurable digital inputs and outputs which are set up to suit the installation requirements. Setpoint parameters for engine control and system sequencing are adjustable from the fascia of the controller (password protected

Benefits :
  • Integrated solution – less wiring and components
  • Available Remote Display panel – economical solution for remote control
  • Analog gauge (VDO, Datcon, etc.) outputs – operator friendly
  • History log – easy troubleshooting
  • Pressure regulation loop and Load limitation
  • Smooth engine speed control
  • Less engineering and programming
  • Perfect price/performance ratio

Request
Callback
Yes! I am Interested

Coolite Lighting Energy Saver Above

Coolite Lighting Energy Saver Above
  • Coolite Lighting Energy Saver Above
Get Best Quote
Approx. Price: Rs 3 Lakh / UnitGet Latest Price

Product Details:

BrandSchneider
Country of OriginMade in India
PhaseThree Phase
Recommended Voltage240-415 V
Mode of operationContinuous
Ambient Temperature-5 to +60 deg C Operating
ApplicationIndoor
Insulation2.5 kV Line to Earth
Overall Dimension275 x 600 x 255 mm

Description:
  • Looks like Computer CPU & provides savings of 10 to 20% in lighting energy consumption.


Characteristics:

  • Improved performance of lighting systems
  • Filters harmonics injected to the line by electronic lighting ballasts and reduces spikes in lighting circuits
  • Improves PF
  • Spot check savings with Power & Energy Monitor-factory fitted option
  • LED Load Status Monitors with alarm relay output for low & high voltage. No fused indicator bulbs to replace
  • User selectable settings to suit site conditions


Short circuit and overload protection to lighting circuits, which often get overloaded as facilities expand

Benefit:

  • High energy savings on lighting loads - 10% to 20% direct savings, cooler lamp operation especially with all types of discharge lamps

Applications:
Suitable for stabilized lighting circuits in:
  • Commercial buildings and complexes
  • Service industry: Hotels, Hospitals, Cinema halls, BPOs
  • Public utilities: Auditoriums, Stadiums (indoor/ outdoor), Educational Institutions
  • Residential buildings and apartments
  • Campus lighting in large industrial and commercial establishments
  • All industrial facilities.
Request
Callback
Yes! I am Interested

Load Banks

Load Banks
  • Load Banks
Get Best Quote
Approx. Price: Rs 1 Lakh / UnitGet Latest Price

Product Details:

Power1000 kW
MaterialMS
Voltage220-440 V
Usage/ApplicationIndustrial
Frequency50-60 Hz
IP GradeIP55
Power SourceElectric

Load Banks Madhura make Load Bank


Description :
We offer Resistive, Inductive and combined customized Load Bank for testing of DG sets. These Load Banks are fully automatic with provision for manual operation. We offer wide range - i.e. 10 KW to 10,000 KW.Madhura make Load Bank
    Major Features
  • Force air cooled
  • PLC based auto load control.
  • Remote SCADA and data logger.
  • Portable.
  • Temperature and overload protection.
  • Suitable for electronic engine also.
  • Outdoor type.
  • Single Unit up to 1600 KW.
Request
Callback


Additional Information:

  • Item Code: LoadBanks
Yes! I am Interested
X

Explore More Product

View All Product


Reach Us
Chintan Shah (Director)
Ensave Energy Private Limited
No. 416/ B, Galaxy Mall, Opposite Zansi Rani Stop, BRTS
Ambawadi, Ahmedabad - 380015, Gujarat, India


Call Us


Send E-mail